2nd Generation S-series (1995-2005) Tech Discuss 2nd generation S-series (1995-2005) general tech topics here.

blazer gon wrong.

Old Mar 11, 2010 | 01:08 PM
  #1  
ezbiz's Avatar
Thread Starter
|
New Member
Joined: Mar 2010
Posts: 5
ezbiz is on a distinguished road
Default blazer gon wrong.

I bought a used 95 blazer s.10 about 4 weeks ago. It ran fine when i first got it but about 2 wks later I had to get the muffler replaced. Also around this time my truck was squealing underneath the hood. I did research and had 2 mechanics take a look into it for me and then I replaced the belt and the tensioner. It sound great when I drove it from the mechanic shop but later that day after being parked for about 3 hrs it started again. Just recently my truck started going terribly wrong. If I tap the gas the rpm would jump to 2 and it. Will stay right there much longer then usual until I turn the truck off. This is abnormal behavior. The power doesn't seem to be there any more. I never tried to floor it. Not trying to do anything ill regret. Any thoughts and tips would be greatly appreciated. Thanks
 

Last edited by ezbiz; Mar 11, 2010 at 02:34 PM.
Old Mar 11, 2010 | 02:39 PM
  #2  
BlaziNator's Avatar
Senior Member
Joined: Sep 2009
Posts: 524
From: Brownwood, TX
BlaziNator is on a distinguished road
Default

Mine did the strange RPM thing from time to time before I replaced my FPR. What other issues is your truck having? Have you done a tune-up recently? Trouble codes?
 
Old Mar 11, 2010 | 05:01 PM
  #3  
ezbiz's Avatar
Thread Starter
|
New Member
Joined: Mar 2010
Posts: 5
ezbiz is on a distinguished road
Default

Thanks for info. Ill have to research fpr. Also when I tap the gas I hear a squealing sound coming from under the hood. B4 the squealing sound wasn't as loud and it was constantly squealing even when still but it sounds worst then ever but it only comes when I hit the gas. Other then that the engine sounds strong. To answer your question no I haven't taken it in for a tune up. Somebody else told me that today too. I have a service engine soon light on. The way this truck is driving I don't know if it can make it to a auto store to test it or to my mechanic.
 
Old Mar 11, 2010 | 05:03 PM
  #4  
Sisk's Avatar
BF Veteran
Joined: May 2009
Posts: 4,772
From: Halifax, NS, Canada
Sisk has a brilliant futureSisk has a brilliant futureSisk has a brilliant futureSisk has a brilliant futureSisk has a brilliant futureSisk has a brilliant futureSisk has a brilliant futureSisk has a brilliant futureSisk has a brilliant futureSisk has a brilliant futureSisk has a brilliant future
Default

Get it scanned for codes. If your check engine light is on then it has thrown a code. That should help you along in the right direction if you get the code # and then check out what it means in the DTC (diagnostic trouble codes) board here on the forum.
 
Old Mar 14, 2010 | 04:18 PM
  #5  
ezbiz's Avatar
Thread Starter
|
New Member
Joined: Mar 2010
Posts: 5
ezbiz is on a distinguished road
Default

What's up. To my surprise I was able to drive my truck to my mechanic. While on the way there the car rpm were jumping and dropping constantly even tho I was driving no more then maybe 10 miles an hr. I think perhaps I need a good tune up. I will have my mechanic scan it for codes this time and have him do what he must to have this truck riding like a champ this summer. Thanks for Help
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
199634
2nd Generation S-series (1995-2005) Tech
4
Apr 20, 2011 02:09 PM
Bybsurfr32
2nd Generation S-series (1995-2005) Tech
1
Sep 16, 2009 07:19 PM
jonesjt
2nd Generation S-series (1995-2005) Tech
19
Feb 20, 2009 10:39 AM
chevblazer02
General Tech Help
1
Oct 31, 2006 12:09 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:20 PM.