cap and rotor problem
#1
cap and rotor problem
Hi guy's well went to replace the cap and rotor on my 2002 blazer,
What an afternoon cap didn't fit but rotor did, started truck getting random
misfire , brother in law after putting rotor on lifted and turned it could this be the reason for the misfire? didn't have it when I went to his place..
Put old cap and rotor back on still code 300 random misfire ,any idea's on this?
What an afternoon cap didn't fit but rotor did, started truck getting random
misfire , brother in law after putting rotor on lifted and turned it could this be the reason for the misfire? didn't have it when I went to his place..
Put old cap and rotor back on still code 300 random misfire ,any idea's on this?
#2
Normal for the rotor to pull up ~1/4" and turn. These things are real fussy when it comes to tune up parts. Use AC Delco only, D328A cap and D465 rotor. Aftermarket stuff doesn't last, and sometimes it doesn't work right out of the box... save your money.
#5
well update changed the plugs today seems a little better but still getting code p0300
will do the wire soon But the weird thing is didn't have any misfire before attempting cap and rotor
will do the wire soon But the weird thing is didn't have any misfire before attempting cap and rotor
Thread
Thread Starter
Forum
Replies
Last Post
Krafty10
2nd Generation S-series (1995-2005) Tech
4
04-11-2015 08:03 PM
Exodus5
2nd Generation S-series (1995-2005) Tech
2
02-29-2008 10:59 AM