When I got my blazer the driver side door seal was off and you can hear wind really bad from it, but no water leaks surprisingly. So I went to the junkyard and pulled one off some blazer.

My question is what type of glue should I use to seal the seal back on, as layers of electrical tape isn't holding up... Thanks.

 

3M Weatherstrip adhesive #08001, commonly referred to in the industry as "elephant snot". Comes in a 5 ounce tube and most auto parts stores have it. Apply the snot to the weatherstrip and temporarily install it for a second or two and remove it. Wait 5 minutes and install the weatherstrip permanantly. Make sure you install it where you want it, 'cause it won't let go when the two surfaces contact each other

 

Lol! Almost good as super glue in that regard. "Do not use this product while naked and with an itch."

Suggest wearing old gloves.. REALLY!

 

Sweet, thanks a bunch.

 

Crap... Now you tell me this. where the heck were you last weekend.