Downsizing coolant tank?
Thread Starter
|
Starting Member
Joined: Feb 2019
Posts: 246
From: middle Tennessee
Downsizing coolant tank?
I was wondering could i use a smaller coolant recovery tank, so that i can have more room for relays and distribution bars. I have a lot of upgrades in the future would like to have a way to add them if possible .
BF Veteran
Joined: Jul 2013
Posts: 2,422
From: Northeastern Nevada, USA
Probably. I know mine never even comes close to taking in all the coolant in the recovery tank, so I'm sure it could get by just fine with quite a bit less. You can buy a cheap plastic universal one for 10-15 bucks, but you'll have to come up with some way to mount the PCM.
Personally, I would consider relocating the battery instead.
Personally, I would consider relocating the battery instead.
Junior Member
Joined: Apr 2013
Posts: 463
Probably. I know mine never even comes close to taking in all the coolant in the recovery tank, so I'm sure it could get by just fine with quite a bit less. You can buy a cheap plastic universal one for 10-15 bucks, but you'll have to come up with some way to mount the PCM.
Personally, I would consider relocating the battery instead.
Personally, I would consider relocating the battery instead.
Thread Starter
|
Starting Member
Joined: Feb 2019
Posts: 246
From: middle Tennessee
Ive converted it to a group 24. Makes life wayy easier! I think i can fabricate a bracket to hold pcm. Im also working on something to hold a battery onto old tire crane crank underneath.i already have the battery box, about 20 feet of 2/0 awg, anl fuse.
Thread
Thread Starter
Forum
Replies
Last Post
03jawja
2nd Generation S-series (1995-2005) Tech
2
Apr 16, 2020 10:09 AM
christine_208
2nd Generation S-series (1995-2005) Tech
5
Sep 30, 2018 09:57 PM
megaroos_00
2nd Generation S-series (1995-2005) Tech
1
Jul 23, 2010 02:22 PM
