i have a 99 jimmy, power heated mirrors. the driver mirror does not move with the controls but the right one does. does this just mean the mirror is dead? or is there a fuse for each mirror? if i have to replace it thats fine, but if its just a $0.05 fuse i'd rather do that =P honestly im not sure if it ever worked. i dont hear any noise however i have only tried moving it while driving, so may be hard to hear. i will try pushing the button with the key on but engine off and see if theres any noise. anyone know which wire is power so i can do a test on the switch incase i look and cant tell. just asking ahead of time because i dont know what the wires look like for that off the top of my head.

thanks

 

I've posted the mirror schematics in the past so you should be able to find them. I believe they were in a thread or two on converting the older style 97 mirrors to the 98+ mirrors.

There is only one fuse so you either have a dead switch (likely), a wiring problem to the mirror, or a dead mirror (rare for it to go completely dead as there are two motors).

Post up if you cannot find the schematics with a search or three using some of the terms I provided above. Someone will likely be able to find them if you cannot.