So I`ve been having a random abs/brake light issue. Sometimes 2 days without it, sometimes twice a day. Cleaned the ground, didnt help. Everything I look at says curcuit board has cracked connections. Was gonna take it out and resolder it. But the hex screws are rounded. So the next best thing for now. Electric tape over the lights on the dash, I dont see them and I feel better. Guys, this is just for now

 

Drill hex heads off

 

Yep, I know, just dont feel like it right now

 

I disabled mine after getting some really hard pushback on the brake pedal for no apparent reason.I unplugged the electrical to the module and taped over the led in the dash cluster.Brakes work great,just no antilock.

 

if you can't fix it duct it [as in duct tape]