Front tires Lagging in 4x4
Junior Member
Joined: Dec 2008
Posts: 378
From: Wading River, NY (Long Island)
First you have to determine if that is actually the cause. Once you have verified that you have an over full condition, you must remove the transfer case to replace the input seal on the front of the transfer case.
As far as flushing vacuum lines, I would use something like simple green or other suitable degreaser that won't harm the vacuum lines.
As far as flushing vacuum lines, I would use something like simple green or other suitable degreaser that won't harm the vacuum lines.
Ok Obviously the one goes to the Actuator but which one of the 'T's is the hose that runs to the Transfer case from the Manifold? Close to the ABS unit or closer to the manifold?
1999
Thread
Thread Starter
Forum
Replies
Last Post
Striker911
Steering, Suspension & Drivetrain
8
Mar 6, 2014 11:56 AM
bertrenolds
Steering, Suspension & Drivetrain
1
Dec 16, 2012 08:16 PM
worley23
1st Generation S-series (1983-1994) Tech
6
Sep 14, 2011 07:58 PM
