Hatch release doesn't work, was working fine. Remote works all locks and the lights flash when I hit the rear door button. Is there a way to reset it. I looked in the book and didn't see a fuse for it, but there is a relay in the fuse box in the engine compartment for lift glass

 

If you can hear the electric actuator when you hit the button the plastic on the end of the actuator is probably broken.

If you can't hear the actuator check the fuse & relay first. You can open the glass with a screwdriver through the hole under the carpet by the handle inside if the plastic piece is not broken.

Do a search this was covered recently and you don't have to buy the acutator if the plactic piece is broken. You can get the plastic piece at NAPA. I posted the part # recently but don't have it with me.