Hi!

First ... i am from germany and my english is not the best, please sorry for that.

I have a 1999 Chevy Blazer and out of the air System it cames all the time hot air. From the glovebox it cames a "sssst clack" in time intervals, so i think the heater blend doort actuator ist damaged.
After some search i found a removal instruction, follow it (with some curses and bloody finger), but after i screwd out the two front screws, the actuator will not lift of from its place.
I thought there was one more screw and this one i could not reach. So i stop my attempt and give up.

But now i read in an english forum there is no third screw... but how hangs it, or my right question: How i detach this actuator?

Greetings from Germany to all Chevy Fans...
Frederic

 

There are 3 screws that must be removed

 

Hi!

Ok, but who unscrew the third screw? I can see it, and over this screw is only a little room.

Greetings...

 

https://blazerforum.com/forum/tech-a...-method-69608/
Did you follow this link? There are only 2 screws, after that it should lift up and out of the bracket. It might be stuck in there pretty tight.

 

Hi!

Yes yes... i found this link and use ist as instruction manual.
I came until remove of the screw, but the actuator seems to hang on the back side.

And 99blzr says "There are 3 screws that must be removed"....

I am confused!

Greetings...