Help! Throttle sticking open after start!
Hey guys,
Can anyone help shed some light on this problem! The 1st start of the day is usually normal. The blazer starts revs up for usual 5-10 seconds, then idles normal.
After blazer is hot - warmed up, after start it sticks open at around 4700 RPM for at least 30-50 seconds (sometimes longer) before idling...
I replaced (Throttle position sensor & Idle control valve) both. And it still does the same thing... It is driving me crazy!!!
Any other suggestions - Please advise.
As always thank you very much for your time and consideration!!!
1995 S-10 blazer/2 WD/4.3L - V-6 145k miles
Can anyone help shed some light on this problem! The 1st start of the day is usually normal. The blazer starts revs up for usual 5-10 seconds, then idles normal.
After blazer is hot - warmed up, after start it sticks open at around 4700 RPM for at least 30-50 seconds (sometimes longer) before idling...
I replaced (Throttle position sensor & Idle control valve) both. And it still does the same thing... It is driving me crazy!!!
Any other suggestions - Please advise.
As always thank you very much for your time and consideration!!!
1995 S-10 blazer/2 WD/4.3L - V-6 145k miles
Thread
Thread Starter
Forum
Replies
Last Post
ComputerNerdBD
2nd Generation S-series (1995-2005) Tech
5
Oct 3, 2022 01:34 AM
GeneralBlazer
Engine & Transmission
0
Jul 11, 2014 02:18 PM
chris015
The Lounge
6
Feb 14, 2012 10:20 AM





