Hi guys new to the forum here seeking some help from any helpers with a 95 chevy blazer pictures will be coming soon but upon installing a stereo in the dash somehow under the panelling in the center of the dash i found a vacuum leak i might have bumped it and it came off not sure it was a black vacuum line with a suction cup looking thingy at the bottom how ever the only thing i could come up with was a white circular hole around where the vacuum end is thats the only thing near or even by that i could find on the box however i hooked it up to the hole now i have leaking coming from the back of the box along the firewall in the center of the floor where my center console is located on the floor ive tried searching the internet for pictures and even went to the deal today for some break down pictures ive had no luck any ideas? Like i said before sometime this week when i get sometime ill try and take some pictures of the location and post them and maybe someone else out there with a 95 could look under there dash for me its in a location that doesnt require removing anything

 

*Moved to '2nd Gen Tech'*

Using punctuation and capitalization in your posts makes it far easier to read and understand and will usually result in more replies to your problem.

 

Welcome to the forum.

I'll see if I can find what you are talking about, but pics would definetly help.

 

Hey guys im sorry for the lagg on the photo's. The 4th was a blast and i hope everyone had a great 4th themselves.

 

welcome from Northern Mn

 

Greetings and Thank you 247Monster. Hey im heading to MN next week with this thing if i could ever get the vacuum leak figured out.

 

I looked the other day but wasn't quite sure on where I was looking. I'll take another look soon, probably tomorrow. (well, I guess later today) What was your question about it again? Are you wondering where the vac line attaches?

 

I posted some pictures on this post of the location for you. If the pictures are not veiw able let me know but yes im trying to figure out if its suppose to be attached in the location the vacuum line is in on my pictures or not thanks for all the help i appreciate you taking the time to look for me.

 

I still need some help here guys

 

Sorry I forgot that I was supposed to look earlier today until I saw your post.

Mine doesn't have a vac line attached to that white thing. But I may have pulled one off while running wires back there. You can see them in the pic here.


I'll see if I can remember to pull the panel tomorrow and I'll poke around and see what might be the issue.