HID and Stock Headlight assembly?
Thread Starter
Joined: Oct 2009
Posts: 4
HID and Stock Headlight assembly?
I am new to these forums. Hello, im not sure if im in the right forum, but my question is can I use the stock headlight assembly and purchase a HID conversion kit and will it work (will it fit)?
Beginning Member
Joined: Aug 2009
Posts: 40
Yes. Make sure you get the correct bulb sizing. Check your bulb sizing. I have aftermarket headlights, so my sizing was 9005 for lowbeams, but I think 9006 is the bulb for stock headlights for 2nd gen blazers.
New Member
Joined: Oct 2009
Posts: 74
From: Eskilstuna, Sweden
three questions:
1. I wont have to cut the casing for the bulb to fit?
No I didnt cut any wires when I converted my Blazer
2. what is a good HID seller, but is somewhat cheap in price?
Look in this forum, one of the sponsors are selling HID kits.
3. would i need a relay harness?
No.
1. I wont have to cut the casing for the bulb to fit?
No I didnt cut any wires when I converted my Blazer
2. what is a good HID seller, but is somewhat cheap in price?
Look in this forum, one of the sponsors are selling HID kits.
3. would i need a relay harness?
No.
Last edited by blajeans; Dec 20, 2009 at 02:57 PM. Reason: Thinking before I wrote :D
Please be patient and WAIT for someone to answer your questions. Posting consecutively after waiting only a few hours is no where near patient.
Also, the search function can turn up A LOT of threads in which your questions have already been answered. You just have to find them.
And one of the site sponsors is a HID retailer. Check out the group and member buys section.
Also, the search function can turn up A LOT of threads in which your questions have already been answered. You just have to find them.
And one of the site sponsors is a HID retailer. Check out the group and member buys section.
Thread
Thread Starter
Forum
Replies
Last Post
JeRM
General Chat
20
May 2, 2012 07:46 AM
returnofsid
2nd Generation S-series (1995-2005) Tech
6
May 30, 2009 10:39 PM
