How to test a crank shaft sensor
#1
How to test a crank shaft sensor
I cant say it any better than this:
Note, we have a 12v system and our signal wire is yellow. Also, if you test ok at the sensor then go up to the engine computer connector and make sure the signal is good up there as well.
George
Note, we have a 12v system and our signal wire is yellow. Also, if you test ok at the sensor then go up to the engine computer connector and make sure the signal is good up there as well.
George
Last edited by GeorgeLG; 12-09-2023 at 11:15 AM.
Thread
Thread Starter
Forum
Replies
Last Post
christine_208
Engine & Transmission
1
03-30-2018 02:31 PM
jannes_z-28
2nd Generation S-series (1995-2005) Tech
60
11-07-2014 04:47 PM
aquaman67
Lighting & Electrical
0
03-17-2014 11:41 AM
mitfan311
2nd Generation S-series (1995-2005) Tech
1
06-16-2010 07:59 PM