Ignition Lock Cylinder
Thread Starter
|
Beginning Member
Joined: Aug 2012
Posts: 27
From: Birmingham, AL
Ignition Lock Cylinder
02 ZR2 Blazer
Of the 5 key positions A: Accessory B: Lock C: Off D: Run E: Start my Blazer will only go to C: Off D: Run E: Start
At the same time there is a parasitic drain - the battery has to be disconnected or it will die - also a hum from the engine bay in the C: Off position.
Two separate issues or possibly related? What about fixing the switch - could the lock cylinder be replaced like on the old Chevys?
Both issues are annoying - especially the battery.
Of the 5 key positions A: Accessory B: Lock C: Off D: Run E: Start my Blazer will only go to C: Off D: Run E: Start
At the same time there is a parasitic drain - the battery has to be disconnected or it will die - also a hum from the engine bay in the C: Off position.
Two separate issues or possibly related? What about fixing the switch - could the lock cylinder be replaced like on the old Chevys?
Both issues are annoying - especially the battery.
Thread
Thread Starter
Forum
Replies
Last Post
eknox327
2nd Generation S-series (1995-2005) Tech
25
Dec 13, 2018 11:33 PM
pablo420
Lighting & Electrical
4
Jan 13, 2013 06:02 PM
Hammond1524
2nd Generation S-series (1995-2005) Tech
4
Apr 23, 2011 03:46 AM
fixer34
TrailBlazer GMT360/GMT370 (2002-2009) Tech
1
Dec 17, 2010 03:12 PM
