Locking rod
#1
02-08-2011 | 06:53 PM
Thread Starter
|
Beginning Member
Joined: Mar 2010
Posts: 11
From: RI
Locking rod
I had to remove the door panel to replace the pass side mirror.
Anyone have any tips for getting the plastic piece for the door lock slider to clip back onto the rod. There isnt alot of room in there. I was thinking about tying some fishing line to the rod to hold it out while I push the plastic piece back on.
Anyone have any tips for getting the plastic piece for the door lock slider to clip back onto the rod. There isnt alot of room in there. I was thinking about tying some fishing line to the rod to hold it out while I push the plastic piece back on.
Thread
Thread Starter
Forum
Replies
Last Post
Klturi421
2nd Generation S-series (1995-2005) Tech
1
08-02-2011 07:21 PM