Maf

Reply Subscribe

Thread Tools

Search this Thread

Dec 27, 2009 | 03:37 PM

st3

Thread Starter

Joined: Dec 2009

Posts: 1

From: Madison, WI

Maf

While cleaning off my MAF sensor in my 98 Blazer I accidentally bent the very ends of the elements. I tried my best to straighten them out but am afraid the damage is done. Am I screwed?

Dec 27, 2009 | 03:44 PM

swartlkk

Administrator

Joined: May 2005

Posts: 41,331

From: Waterloo, NY

So long as the elements are still connected to the beams on both ends, there should be no lasting effects from bending the ends. If they broke free, then you are screwed.