New ignition switch and still no start

Closed Thread Subscribe

Thread Tools

Search this Thread

#11

02-13-2012, 04:55 PM

slagburger

Beginning Member

Thread Starter

Join Date: Aug 2010

Posts: 14

Quote:

Originally Posted by spittybays

Don't want to send you on shadow chasing but there might be some crud up on the main connector block. The one that bolts to your ignition switich harness. I had a work don't work thing happen once with a new switch, unbolted the block, put some di-electric grease in rebolted. Right as rain since. Good luck!

Ok this is what I have done.....I took the new one out just for giggles, put the old one back in and used di-electric grease on the bolt together block and the passlock wire up at the key end an d voila!!! Starts everytime.....Now I am wondering how long this lasts for but at the end of the day I have a new switch if all else fails!!!
Thanks so much for all of the advice, if ever I have a problem with the blazer, this place solves it!!!

Cheers!!