OBDII connector
#1
07-26-2007 | 12:41 PM
Thread Starter
Joined: Jul 2007
Posts: 43
OBDII connector
Hi All,
Anyone know where the +12V on pin 16 of the OBDII connector under the dash is supposed to come from? I recently bought a 2001 blazer and was trying to hook up an AutoTap to it, but there's no power on Pin 16. Funny thing is that the blazer runs OK, so the CPU has to be getting power. Is there a common fuse or something that could be blown?
Terry
Anyone know where the +12V on pin 16 of the OBDII connector under the dash is supposed to come from? I recently bought a 2001 blazer and was trying to hook up an AutoTap to it, but there's no power on Pin 16. Funny thing is that the blazer runs OK, so the CPU has to be getting power. Is there a common fuse or something that could be blown?
Terry
#2
07-26-2007 | 12:44 PM
RE: OBDII connector
Is your cigarette lighter working? If not, then check the fuse. The DLC gets its power from the same circuit.
Mine was blown on my '04 Rainier when I bought it too...
Mine was blown on my '04 Rainier when I bought it too...
#3
07-28-2007 | 09:14 PM
Thread Starter
Joined: Jul 2007
Posts: 43
RE: OBDII connector
Thanks Kyle... that was it! Blown 15A cigarette lighter fuse.
#4
07-29-2007 | 06:09 AM
RE: OBDII connector
Glad I could help!
Thread
Thread Starter
Forum
Replies
Last Post
mfd70
2nd Generation S-series (1995-2005) Tech
4
08-15-2020 05:46 AM
disturbedgame
2nd Generation S-series (1995-2005) Tech
1
05-08-2007 11:32 AM
