Squeek in the front end
#1
Thread Starter
Join Date: Jun 2009
Location: Omaha, Nebraska
Posts: 1

Hey guys, I just got my blazer from my brother n law a few months ago cuz he didnt wanna put any money into. So thats what ive done. Ive replaced the exhaust, the u-joints and motor mounts. ive put a yune up on it then i wrecked it. in the body shop now, will post pics when it comes back.
My question is this: when im driving down the road and the front end is moving up and down in anyway it squeeks real bad. when i hit the brakes and let off, it squeeks, when i shake it from the outside it shake. Ive been planning on changing the tie rod ends, ball joints, pitman arm idler arm and adjusting sleeves. Will that take care of it. or could it b something else?
It also seems like its mainly on the left side. Thanks in advance, i appreciatte it.
My question is this: when im driving down the road and the front end is moving up and down in anyway it squeeks real bad. when i hit the brakes and let off, it squeeks, when i shake it from the outside it shake. Ive been planning on changing the tie rod ends, ball joints, pitman arm idler arm and adjusting sleeves. Will that take care of it. or could it b something else?
It also seems like its mainly on the left side. Thanks in advance, i appreciatte it.
#2
Also check your torsion bar mounts, control arm bushings, and sway bar bushings/endlinks. They may be rotting out or could just use some lithium spray or something similar.
Thread
Thread Starter
Forum
Replies
Last Post
redpeppers
2nd Generation S-series (1995-2005) Tech
2
07-25-2007 01:46 PM






