Timing, 01 blazer
#1
Timing, 01 blazer
I bought a Ultragauge the other day. After hooking it up to the truck, it found it and everything is okay. My question is when i look at timing, it is saying it is advanced 30 deg. On my way to work today it fluctuated between 18 deg and 31 deg. This seems excessive. Has anyone else measured this and knows what it should be? The distributor has been out two different times for various reasons and im thinking it got installed a tooth off or something. Would it even run if it was actually 30 deg advanced?
#2
I could never get them to run a tooth off.The timing is controlled by the computer and you should get a trouble code if somthings wrong.The vehicle runs okay?
#3
I installed my distributor 1 tooth off and it ran, but it ran like junk, misfiring and shuddering like crazy.
Thread
Thread Starter
Forum
Replies
Last Post
Doctorvette
1st Generation S-series (1983-1994) Tech
10
11-05-2012 11:57 PM
Denominator
Engine & Transmission
0
09-23-2010 02:40 PM
hotrodln
2nd Generation S-series (1995-2005) Tech
17
04-26-2010 07:32 PM
Denominator
Engine & Transmission
10
04-25-2010 06:31 PM