Windshield Wiper argh!!
#1
Windshield Wiper argh!!
Hey guys, my Blazer just failed inspection because when my wiper blade switch is put in the off postition, it keeps going for a few more rounds. I thought it could be the relay, but found out that there is no relay for it. I think it may be the switch itself, but am not sure. Any help here? thanks ahead of time.
#2
These things are known for having cold or broken solder joints on the circuit board: Buy Dorman - Help Wiper Motor Pulse Board 88136 at Advance Auto Parts
Some people take them out and re-solder them with decent results. I usually replace them, they have a lifetime warranty so if they fail again, replace it. Takes 10 minutes... it's located on the wiper motor, under the hood, driver side.
Some people take them out and re-solder them with decent results. I usually replace them, they have a lifetime warranty so if they fail again, replace it. Takes 10 minutes... it's located on the wiper motor, under the hood, driver side.
Last edited by Captain Hook; 11-02-2012 at 08:18 PM.
Thread
Thread Starter
Forum
Replies
Last Post
beater98
2nd Generation S-series (1995-2005) Tech
2
08-02-2009 11:55 PM