2nd Generation S-series (1995-2005) Tech Discuss 2nd generation S-series (1995-2005) general tech topics here.

Wont come out of 4 low

Old Dec 3, 2007 | 10:11 AM
  #1  
machinist99's Avatar
Thread Starter
Joined: Dec 2007
Posts: 2
From:
machinist99 is an unknown quantity at this point
Default Wont come out of 4 low

I can't get my 99 s10 Blazer out of 4 low.
I tried putting it into neutral to shift out , and also going in reverse a little ways and nothing works.
I'm screwed , this is my daily driver , Please help.
 
Old Dec 3, 2007 | 10:24 AM
  #2  
gocartone's Avatar
Joined: Oct 2007
Posts: 125
From: Superior, WI Ashland, WI
gocartone is an unknown quantity at this point
Default RE: Wont come out of 4 low

Just keep shuting off and restarting the truck. This has happened to me a couple times and after a while it should shift out. Or just keep turning the key on and pushing 2hi and if it doesnt click in turn the key off and try again.
 
Old Dec 3, 2007 | 10:32 AM
  #3  
thesnowgod's Avatar
Beginning Member
Joined: Nov 2007
Posts: 12
thesnowgod is an unknown quantity at this point
Default RE: Wont come out of 4 low

I had a similar problem last year with my 2000. My cases leak terribly and so it was low on diff fluid.

I took it to a local oil lube place *shudder*, I know, I know, but they were able to drain and refill it. Well, they went to drain it and saw it was empty so they topped it off. Ran fine after that. After the snow and slop this AM it would appear I need to top it of again this year.

See if that helps.
 
Old Dec 3, 2007 | 11:18 AM
  #4  
machinist99's Avatar
Thread Starter
Joined: Dec 2007
Posts: 2
From:
machinist99 is an unknown quantity at this point
Default RE: Wont come out of 4 low

Thanks guys , I'll try both of these remedies and post back.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
myxil
Steering, Suspension & Drivetrain
7
Jan 16, 2014 05:31 PM
lght1622r
Engine & Transmission
4
Sep 13, 2011 09:54 PM
desertdog
Steering, Suspension & Drivetrain
6
Mar 2, 2011 10:18 PM
twotonethunder
Engine & Transmission
3
Jan 26, 2010 06:09 AM
nitro7
Engine & Transmission
5
Jan 10, 2010 03:09 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:29 PM.