ok how do you get the 3rd brake light out of where it is < its not working and im not sure how to remove it to get to the wires. also was gonna change my reverse bulbs and i cant figure out how to get to the bottom screw on the taillight. the shock/strutand molding is in my way, i would say mainly the shock/strut. i'll take any help i can get.

 

for the bottom screw on the taillight you can actually disconnect that strut arm and swing it out of your way, you`ll see a little clip that if you lift up on it just a little you can pull the strut off the pin and then you can get to that screw...as for the 3rd brake light if its the one on the roof witht he led bulbs, theres 2 screws holding it down to the roof....

 

ok cool but as far as the wiring goes how do i get to it to disconnect it or to make sure it didnt disconnect by itself somehow?