Grounding down 2001 jimmy
Senior Member
Joined: Oct 2010
Posts: 931
From: Monroe City, IN
Ground both amps to the same point, wherever is closest to their location. Use a stainless steel bolt a little longer than you need, then on the bottom side run a ground wire from the bottom of the body/bolt to the frame of the truck. It's about as solid a ground as one can get IMO. Don't forget to do the BIG 3 and ground the battery to the frame as well.
Last edited by altoncustomtech; Apr 25, 2011 at 12:50 PM.
Thread
Thread Starter
Forum
Replies
Last Post
