Probably going to sell all my boxes and subs and make a custom form fitting 10" box and amp rack on the rear passenger side wheel hump since there is a lot of room there and it's never used.

Can anyone help me do this?

I've never done it before.

Anything I should know?

How do I "test" position everything to decide where I want it?

How can I make sure the box is exactly .5 cubic feet? (the sub requires this)




Un-related:

Sub in question is a clarion WQ2510D.

Clarion - 10" Dual-Voice-Coil 4-Ohm Subwoofer - Gray - WQ2510D

100 with 4 year "protection plan".

Really, it will only be $50 since I have $50 in best buy store credit.

I am sick and tired of my entire cargo area filled with this 4.1 cubic foot box for this 15" sub I have. Selling it for $75 (paid less than $40 for sub + box)

 

cardboard blue painters tape, saw wood fiberglass sheets and resin...
this is how i did mine..

tape up the panel...with blue painters tape voer the floor as well so u dont drip..
fiberglass sheets on the blue tape. make a bottom design from cardboard.. then transfer it to mdf..
then make the remaining prices or cardboard and transfer them and assembly