running 0/1 wire
#1
running 0/1 wire
does anyone that is running 0/1 wire have some pictures of how/where they ran it ?
#2
RE: running 0/1 wire
Drill a hole in the firewall and use a gromet... FTW I ran my powerwire down the center of the vehicle, but i have a first-gen so i cant help you with that part.
#3
RE: running 0/1 wire
theres a groomet on the passenger side where you would put ur left foot. pull the carpet back then it should be there, it is the groomet where the antenna wire is going through, should have plenty of room for a 1/0 wire. then run it down the passenger side, be sure the run ur rca's and remote wire down the driver side though.
#4
RE: running 0/1 wire
ok that what i was figuring from reading around here, does it bulge the carpet up alot ?
#5
RE: running 0/1 wire
no, jus take ur time and make it look good.
#6
RE: running 0/1 wire
do a search for my build thread and look at the pictures.
Thread
Thread Starter
Forum
Replies
Last Post
chris015
1st Generation S-series (1983-1994) Tech
2
07-08-2012 01:19 AM
bubba181x1
Full Size K5 (1969-1991) GMT415 (1992-1994) Tech
3
03-12-2008 02:05 AM