1994 S10 Blazer Tahoe LT - Revival
#251
Did you see this '94 that sold at the Mecum auction in Kissimmee, Florida for $10,450? There must be a couple guys out there who appreciate these trucks.
https://www.mecum.com/lots/FL0121-44...vrolet-blazer/
https://www.mecum.com/lots/FL0121-44...vrolet-blazer/
#252
Did you see this '94 that sold at the Mecum auction in Kissimmee, Florida for $10,450? There must be a couple guys out there who appreciate these trucks.
https://www.mecum.com/lots/FL0121-44...vrolet-blazer/
https://www.mecum.com/lots/FL0121-44...vrolet-blazer/
#253
So I finally got around to working on another one of the Blazer projects I've had sitting around a while.
Over a year ago I bought a complete set of rear doors, just for the tiny window trim piece. They were hard to find and I didn't want to lose them, so I never installed them on my Blazer.
Just finally sat down and re-created them using tinkercad, then 3d printed them. Took a couple versions to get them where I wanted, but all finished and installed now. IMO they turned out pretty well.
I made a video about the process as well. . . Forgot to record the first part of designing them, but I talked about how I did it, and show more details when I started making revisions.
Now that I've got the design finished, I've got them listed on eBay for any other 1st gen 4 door guys out there that need a set.
https://www.ebay.com/itm/124695637738
Over a year ago I bought a complete set of rear doors, just for the tiny window trim piece. They were hard to find and I didn't want to lose them, so I never installed them on my Blazer.
Just finally sat down and re-created them using tinkercad, then 3d printed them. Took a couple versions to get them where I wanted, but all finished and installed now. IMO they turned out pretty well.
I made a video about the process as well. . . Forgot to record the first part of designing them, but I talked about how I did it, and show more details when I started making revisions.
Now that I've got the design finished, I've got them listed on eBay for any other 1st gen 4 door guys out there that need a set.
https://www.ebay.com/itm/124695637738
#254
Hey guys been a while. Seems like a good time to post. . .sitting here waiting for AAA after my Radiator drain plug just blew out.
Good news is the engine seems to be fine. Bad news is I get to buy another new Rad.
Oddly enough I was on my way home from the Pick n' Pull yard. Found a 93 s10 with a manual so I just went and yanked the clutch/brake pedal assembly, shifter, and a couple interior parts.
The 4L60 has been acting up more and I have decided I'm done with it. So stay tuned because I'm going to be swapping it for an NV3500. Today was my first round of collecting parts. Will probably start a new thread when I get started with the work on the swap.
Shifter and Pedals down. Now I just need an NV3500, clutch, flywheel, pilot bearing, and hydraulics. Planning to use the internal slave on the NV.
Edit: Here are some pics from today.
Also, I did get a new all aluminium radiator, complete with a shroud and new fans ordered. Hopefully that will be here in a few days.
Good news is the engine seems to be fine. Bad news is I get to buy another new Rad.
Oddly enough I was on my way home from the Pick n' Pull yard. Found a 93 s10 with a manual so I just went and yanked the clutch/brake pedal assembly, shifter, and a couple interior parts.
The 4L60 has been acting up more and I have decided I'm done with it. So stay tuned because I'm going to be swapping it for an NV3500. Today was my first round of collecting parts. Will probably start a new thread when I get started with the work on the swap.
Shifter and Pedals down. Now I just need an NV3500, clutch, flywheel, pilot bearing, and hydraulics. Planning to use the internal slave on the NV.
Edit: Here are some pics from today.
Also, I did get a new all aluminium radiator, complete with a shroud and new fans ordered. Hopefully that will be here in a few days.
Last edited by KnightBlazer; 04-30-2023 at 05:04 PM.
#255
I finally got around to putting together the Blazer update video I've been working on for a year.
Part 1:
Currently working on a Part 2 with the new aluminum rad and a few other things.
Part 1:
Currently working on a Part 2 with the new aluminum rad and a few other things.
#256
Sanded and Repainted my Roof Rack. Been wanting to do this forever. It was pretty much the most weathered looking thing on the outside of my Blazer.
I also made a video about beginning my NV3500 swap, I guess I should probably just start a new thread for that project once I get into it a little further.
I also made a video about beginning my NV3500 swap, I guess I should probably just start a new thread for that project once I get into it a little further.
Thread
Thread Starter
Forum
Replies
Last Post