2000 Chevy Blazer Build
#14
New Member
Thread Starter
Join Date: Sep 2008
Location: New Brunswick
Posts: 78

Put some more miles on today and all was good. I thought it felt more stable and my wife agreed and she isn't a car person so if she noticed a difference then I'd say its a good investment for anyone on the fence. I'm going to re torque everything just to make sure then on to some new tires.
#15
New Member
Thread Starter
Join Date: Sep 2008
Location: New Brunswick
Posts: 78

checked the spacers and all was good. Picking up some winter treads tomorrow and started to investigate the blower motor resistor. The cover is missing so previous owner must have been looking at at one time. I'm going to pick up a new one and try to fab up a cover. Going to look for a new rear bumper as well, everything is rusted here so might as well go new.
#18
New Member
Thread Starter
Join Date: Sep 2008
Location: New Brunswick
Posts: 78

I've had a stuck rear caliper bugging me so decided to just buy new pads, rotors and calipers. New fuel filter change and service as well. Hate to spend so close to Christmas but it is what it is.
#19
New Member
Thread Starter
Join Date: Sep 2008
Location: New Brunswick
Posts: 78

New drivers side wiper arm installed. All is good now so hopefully won't have that issue again.
Starting to plan the spring/summer upgrades:
intake gasket fix, plugs/wires/cap/rotor and probably do the spider injector too. Any other items I should do at the same time please let me know.
Replace the rear bumper, few rust spots cleared up and repainted
replace rear shocks and find a nice set of summer rims
Starting to plan the spring/summer upgrades:
intake gasket fix, plugs/wires/cap/rotor and probably do the spider injector too. Any other items I should do at the same time please let me know.
Replace the rear bumper, few rust spots cleared up and repainted
replace rear shocks and find a nice set of summer rims





