Baby Semi Build
Thread Starter
|
BF Guru
Joined: Oct 2010
Posts: 5,962
From: Summit Ny
Well the other day I replaced the taillight bulb i burnt while testing the led project
I realized the bulb burnt when i had hyper flash so i did not feel like removing the housing again.
I also adjusted the rear window latch ... finally no squeek so far
I also installed the k & N filter and checked all the fluids
SNOW ANY 1 ? =D
the 2 inches we got Friday melted and now it started again
I also wanted to thank who got me to Rotm this month Its a real honor !
I realized the bulb burnt when i had hyper flash so i did not feel like removing the housing again.
I also adjusted the rear window latch ... finally no squeek so far
I also installed the k & N filter and checked all the fluids
SNOW ANY 1 ? =D
the 2 inches we got Friday melted and now it started again
I also wanted to thank who got me to Rotm this month Its a real honor !
Last edited by xgiovannix12; Apr 1, 2012 at 02:38 PM.
Senior Member
Joined: Jul 2011
Posts: 658
From: Reading, PA
Hey Gio, for the LED hyper flash use this : http://www.ebay.ca/itm/2x-6-Ohm-50W-...item27c497a823
solder them from your ground to the flashing wire then they will flash slow like they are supposed to
solder them from your ground to the flashing wire then they will flash slow like they are supposed to
Thread Starter
|
BF Guru
Joined: Oct 2010
Posts: 5,962
From: Summit Ny
Hey Gio, for the LED hyper flash use this : 2x 6 Ohm 50W Turn Brake Signal LED Bulbs Load Resistors | eBay
solder them from your ground to the flashing wire then they will flash slow like they are supposed to
solder them from your ground to the flashing wire then they will flash slow like they are supposed to
nope im ordering the proper relay for hyper flash thank you tho
