looks great!

I take it that truck came with 3.73's from the factory?

 

Dead sexy!!

 

looks very good, did you keep the body lift, and shackles, or just go with the bds only?

 

Very Nice

 

great pics guys. on an off topic...rex where did you get your prerunner bar?

 

hey every one, i would like first off to just say thanks to everyone, this forum has a really great group of guy and gals, also to all thos with info and general help along the way....

OK so its what i would call finished, for now.. Kenny, the lift still has a P.A.
2" body lift and the rear lift shackles' the shackles though will be comming off and replaced with the factory type,the rear is about 2" higher than the front, there is a vibration from stop, that does go away almost imidiatly
but im thinking its the driveshaft angle, there is 4 deg of shims, that may not be enough, there is a drive line place locally i can have them check it out, I also was able to mount the front skid plate, it was operator error on my part, not BDS.

here are a couple pics of the first Envoy(i think) that has a major lift...
Thanks again to every one
Robert

 

Looks great Robert

 

thanks Gio, its a lot of work, especially when there is a time factor involved..
Can i join the lifted club please

 

why yes you can.

your man card now has the following endorsements:

1. lifted
2. wheel carrier
3. member of 7" club (lift)
4. envoy badass request..approved

congrats.

as for the vibration you probably need the driveshaft rebalanced. i had to have mine done.

 

Your vibration could be a u-joint too. Real common after lifting a vehicle. May also be as easy as pulling out your lift shackles.

Is it a 7" only club, very exclusive!