Building Something...Not Sure What Yet
Thread Starter
|
Starting Member
Joined: Apr 2013
Posts: 133
From: Catty, PA
Building Something...Not Sure What Yet
Added towing ball and wired up the 7 pin trailer connector:
Added front hitch for cargo carrier and tow hook:
Replaced the front sway bar end-links, one was completely broken:
Blacked out the badges:
Removed the bottom of the front bumper and added a tow strap to the tow hooks:
Added front hitch for cargo carrier and tow hook:
Replaced the front sway bar end-links, one was completely broken:
Blacked out the badges:
Removed the bottom of the front bumper and added a tow strap to the tow hooks:
Thread Starter
|
Starting Member
Joined: Apr 2013
Posts: 133
From: Catty, PA
Recieved my OBDII Bluetooth scanner, I would have liked to get an actual shot of my phone in the cardock displaying the info but that means I'll have to dig up my camera, in the meantime here is a screenshot from the phone, still have some playing around to do with placement and what gauges to display.
I think this is what I'm going with for the main screen (no data as it was not connected when this was taken):
I think this is what I'm going with for the main screen (no data as it was not connected when this was taken):
Last edited by HostileJava; Jul 30, 2013 at 08:33 PM.
Thread Starter
|
Starting Member
Joined: Apr 2013
Posts: 133
From: Catty, PA
Transmission cooler received in the mail today and installed:
Definetly makes a difference, I used to sit at 170ish when cruising at 50 mph in the morning on a 60ish degree day and this morning it was 140ish.
Definetly makes a difference, I used to sit at 170ish when cruising at 50 mph in the morning on a 60ish degree day and this morning it was 140ish.
Last edited by HostileJava; Jul 31, 2013 at 07:55 AM.
Thread Starter
|
Starting Member
Joined: Apr 2013
Posts: 133
From: Catty, PA
