Project: It's about time.
#151
#152
Thanks for the tip, i'll get a gas tank skid plate done ! hehe just in case i guess.. and i'll need to swap mine out soon, the seam are very rusted so hopefully they make plastic tanks now for them
#153
Well I got my idler arm done finally, I've needed to do it for 1 1/2 years. It kinda sucked. I started on sunday and finished on monday because I didn't have a pickle fork. So for all of those who want to do it, get one, you will need it.
#154
Where did you get your idler arm and how much was it? Ive needed one for half a year now
#155
Rock auto, it was like $15. There is a link in Gio's sig for a 5% off code too.
#156
Alright thanks how long did it take to changes?
#157
Um, counting the time that I didn't have the pickle fork... about 5hrs If I had the fork from the beginning it would have taken about 2hrs. Also make sure you have about a 1' ratchet extension to get to the bolts that hold the arm on.
#158
Alright ill tackle that in the next few weeks
#159
So I have been working on my led tail light project recently.
Here are some shots of the high power leds I used.
Here is the output in a small room.
And here is what the final product will look like. (I hope)
Here are some shots of the high power leds I used.
Here is the output in a small room.
And here is what the final product will look like. (I hope)
#160
Nice, i can't wait to see the leds installed on the truck