4x4 problem, new to the truck!

Closed Thread Subscribe

Thread Tools

Search this Thread

Jan 19, 2010 | 04:46 PM

youngtearz

Thread Starter

New Member

Joined: Jan 2010

Posts: 7

4x4 problem, new to the truck!

Hi,
i just currently bought a 1999 Chev blazer, I've owned one in the past and never discovered this problem. The lady who i bought the truck off off of she had engaged it into 4hi and the lights on the switch went out.

I have checked for corrosion, i have check the vacuum lines under the battery, what else could it be. I have disconnected the vacuum line that runs to that peice under the battery, free'd up the wheels but i would like the transfer case to go back in 2hi..
any suggestions.

Jan 19, 2010 | 06:10 PM

Logan

Senior Member

Joined: Nov 2007

Posts: 611

From: Ottawa, Canada

TCCM might be gone. Where abouts you located?

Jan 19, 2010 | 06:29 PM

swartlkk

Administrator

Joined: May 2005

Posts: 41,331

From: Waterloo, NY

3-button or 4-button switch in the dash?

Have you tried disconnecting the battery? Have you checked all of the fuses?

Jan 19, 2010 | 08:45 PM

youngtearz

Thread Starter

New Member

Joined: Jan 2010

Posts: 7

its the 4 button, im located in toronto canada

all fuses are good, diss connected the batt and nothing!

Last edited by swartlkk; Jan 19, 2010 at 09:06 PM. Reason: Combining Consecutive Posts - Please use the EDIT function to add additional information to your post if another member has yet to reply. Consecutive Posting is prohibited by the rules of the forum.