96 blazer engine swap

Closed Thread Subscribe

Thread Tools

Search this Thread

Aug 7, 2010 | 02:17 PM

BlazerX2

Thread Starter

New Member

Joined: Aug 2010

Posts: 6

From: North Fla

96 blazer engine swap

I have a 96 blazer 2wd 4.3 vortec....motor is shot....I have seen plenty of posts on swappin the 4.3 vortec for a 350. I read alot of them and still kinda confused about it all.....I have seen where a 350 will bolt up to a 4.3 trans...and the 4.3 computer will plug right in to a 350....what I am askin is what exactly has got to be done....what from the 4.3 will work and wont work...I have seen so many posts on this and yet they are still confusing....I just need to know how hard or easy it will be to swap a 4.3 vortec to a 350.....and what all parts I can use and what parts I need to get....of course I would like to keep it all fuel injected and no carb....anyones help will be greatly appreciated

Last edited by BlazerX2; Aug 8, 2010 at 11:54 AM.

Aug 7, 2010 | 11:03 PM

Gimpy Blazer

Senior Member

Joined: Dec 2009

Posts: 845

From: Keller, Texas

There are several compamies that make complete kits. I would suggest calling them up and picking their brains first. There have also been several swaps documented on this website.