AC low side fitting challenge
Thread Starter
|
Starting Member
Joined: Apr 2011
Posts: 1
AC low side fitting challenge
Anyone ever had trouble attaching the quick connect to the fitting on the accumulator? I am trying to add R134 via the low side fitting but the quick connect wont go on all the way. It seems to bottom out about half way on. (?)
I checked the fit on my other Chevy and it worked fine. The one it won't fit is a 2001 Blazer LT. There is a R134 label on the evap. box and the high side fitting is much larger so I believe I'm doing it right. I bought it used so I'm not sure it's an original accumulator. Any ideas welcome. I'm lost on this one.
I checked the fit on my other Chevy and it worked fine. The one it won't fit is a 2001 Blazer LT. There is a R134 label on the evap. box and the high side fitting is much larger so I believe I'm doing it right. I bought it used so I'm not sure it's an original accumulator. Any ideas welcome. I'm lost on this one.
Thread
Thread Starter
Forum
Replies
Last Post
Xavier
2nd Generation S-series (1995-2005) Tech
3
Apr 11, 2014 11:49 AM
DetailersDomain
Detailing
1
Mar 4, 2012 09:58 AM
BudBlazer
Lighting & Electrical
10
Jun 15, 2011 02:05 PM
crazyfrog
2nd Generation S-series (1995-2005) Tech
3
Jul 3, 2008 10:07 AM
