Changing Valve Cover 98 Blazer passenger side
#1
04-05-2013, 10:49 PM
Changing Valve Cover 98 Blazer passenger side
- Any advice?
- About how long?
- Will I be able to change out drivers side valve cover while I have it torn down, or is that just another 3 hours?
Thanks,
G
- About how long?
- Will I be able to change out drivers side valve cover while I have it torn down, or is that just another 3 hours?
Thanks,
G
#2
04-06-2013, 10:46 AM
loosen the alternator and swing it up ( leave the one bolt still on) move all the harness out of the way and spark plug wires, remove valve cover and clean and install new seal/gasket,reverse procedure. as for the driver side, you will have to slide the power steering pump/AC compressor bracket away from the engine. or get a dremel or cut off tool and cut the back of the bracket to clear the valve cover. I've done it in less than an hour.
Thread
Thread Starter
Forum
Replies
Last Post
marksoftball
2nd Generation S-series (1995-2005) Tech
8
11-29-2014 09:27 PM
kancop
2nd Generation S-series (1995-2005) Tech
3
02-17-2014 08:06 AM
89Recon
1st Generation S-series (1983-1994) Tech
1
10-22-2011 05:50 PM
Tony H
2nd Generation S-series (1995-2005) Tech
5
06-14-2009 10:32 AM
