Thats what i was going to say...

But with stock wheels you should be alright with street tires, you WILL rub every once in a while. I never did rub until i got my backspaced rims then i rubbed on everything. and i have a 2 inch bl

 

I only rubbed the frame with 31s stock height and stock wheels(31/10.5/15 bfg ats) even off road, twisted up

 

I was truly hoping that instead of the debating, someone, somewhere, would have some advice on properly uploading pictures.

 

photobucket read this https://blazerforum.com/forum/forum-...ase-read-5167/

 

I'm well aware that my offset plays a part in why I rub! But I am also 100% certain that even with stock wheels I would rub with 31s. Like Diata said stock wheels will rub on the frame rather than the fender.

 

are you going to be off-roading if so you will need to listen to diata and rex, if not you will be fine will still rub some but what point of bigger tires if not going to use em

 

My 31s touch the bumper at some turns with cranked t-bars and keys (still new to get upper control arms), they hit with stock wheels... They hit with 2wd wheels. Hoping once I get arms they will clear a little better, level me out better, and have some better room when twisting around

 

Try this to resize the pictures, it's what I use.

Resize Images online

 

my 31's never rub. stock height.

 

So essentially from what im understanding from this is even with the rc 2.5" sl with upper control arms an all and with 15x7,+2 offset,4"backspacing that 31's WILL RUB????