more poor quality pictures
#1
more poor quality pictures
Well these are a couple of updated pics. I removed both roof racks, removed the side trim, added some clear turn signals, 8000k hid's, painted the bumper and bowtie, and made a door trim grill.
The second picture is a worse quality than the first but I like the angle better.
[IMG]local://upfiles/5909/F6DCAAD83F184878872E36C8BBF32F3E.jpg[/IMG]
[IMG]local://upfiles/5909/F9573147FE1046EB9E8FEECC13611882.jpg[/IMG]
[IMG]local://upfiles/5909/2F4152F5DBC94299A3CCD4027F74192A.jpg[/IMG]
The second picture is a worse quality than the first but I like the angle better.
[IMG]local://upfiles/5909/F6DCAAD83F184878872E36C8BBF32F3E.jpg[/IMG]
[IMG]local://upfiles/5909/F9573147FE1046EB9E8FEECC13611882.jpg[/IMG]
[IMG]local://upfiles/5909/2F4152F5DBC94299A3CCD4027F74192A.jpg[/IMG]
#2
RE: more poor quality pictures
Still looks good man, it took me a while to put some good pics up!!
#3
RE: more poor quality pictures
where did you get the clear signals?
#4
RE: more poor quality pictures
Check your headlights, looks like the tabs may not be properly seated. Your gap between headlight and hood is a little wonky.
Otherwise it looks clean. Now that you took all the factory stuff off it's time to put your own flair on it!
Otherwise it looks clean. Now that you took all the factory stuff off it's time to put your own flair on it!
#5
RE: more poor quality pictures
I want to remove my roof rack. How would i go about doing it?
#6
RE: more poor quality pictures
thanks every1
@ igot10pinitis: Bro I got those locally, best deal ever. I went to my audio place and it just so happened that they were overstocked. Got em for $20--didnt even pay tax(shhh)
@ TripleBlackBlazer: Right you are! In the past month Ive had to pull my lights 3 times and its such a pain to get the tabs seated right especially with the ballasts. I'll fix it though. Plans are in the works for wheels andbodywork but like most, Im still trying to recover from the holidays lol.
@ TheBrettster: The real clean way of removing the rackwould be to shave it but I use it often. I unbolted it with an allen key, threaded the bolts back in tight, and painted the bolts with a touch-up pen.
@ igot10pinitis: Bro I got those locally, best deal ever. I went to my audio place and it just so happened that they were overstocked. Got em for $20--didnt even pay tax(shhh)
@ TripleBlackBlazer: Right you are! In the past month Ive had to pull my lights 3 times and its such a pain to get the tabs seated right especially with the ballasts. I'll fix it though. Plans are in the works for wheels andbodywork but like most, Im still trying to recover from the holidays lol.
@ TheBrettster: The real clean way of removing the rackwould be to shave it but I use it often. I unbolted it with an allen key, threaded the bolts back in tight, and painted the bolts with a touch-up pen.
#7
RE: more poor quality pictures
where did you put your ballasts? i couldnt really find a good spot for them so they are just layin in the engine bay, drivers side is laying on the battery tray next to the battery and pass side is laying next to the air filter
#8
RE: more poor quality pictures
Pics look good.
#9
RE: more poor quality pictures
The ballasts got attached on the grill shell just behind the turn sinals/center strip. Im not that happy with the placement but you're right theres not a lot of good places to mount them.
Hey nj4x4blaze, what are you planning on doing with your 20's?
Hey nj4x4blaze, what are you planning on doing with your 20's?
Thread
Thread Starter
Forum
Replies
Last Post
BlackMatter
2nd Generation S-series (1995-2005) Tech
0
02-16-2012 10:27 PM
dougs10
Steering, Suspension & Drivetrain
1
12-14-2010 03:24 PM