Rebuilding the rebuild
Thread Starter
|
Junior Member
Joined: May 2010
Posts: 364
Rebuilding the rebuild
I went inside again today to get that pesky ticking. I replaced all the lifters and am waiting for the rtv to cure.
http://i1137.photobucket.com/albums/...1999/004-6.jpg
This is the one I had the small fire in due to a vacuum line laying across the exhaust. With the lower intake off I can see what is there now. I have two lines. One is a 3/8ths vent and the other is a vacuum line that stops shortly after the zip tie binding it to the trans dip tube. I'm pretty sure I have to restore vacuum to this line. It is leading towards the transmission.
http://i1137.photobucket.com/albums/...1999/004-6.jpg
This is the one I had the small fire in due to a vacuum line laying across the exhaust. With the lower intake off I can see what is there now. I have two lines. One is a 3/8ths vent and the other is a vacuum line that stops shortly after the zip tie binding it to the trans dip tube. I'm pretty sure I have to restore vacuum to this line. It is leading towards the transmission.
Thread
Thread Starter
Forum
Replies
Last Post
88s10Blazer
General Chat
1
Dec 25, 2007 09:29 PM
