Exaust cut out?
This part looks very tempting...will this help me when I race my buddies?
http://www.stylinconcepts.com/parts..../categoryid/28
http://www.stylinconcepts.com/parts..../categoryid/28
I dont think it will gain you anything, I am not sure but I dont think you are making the power to benifit from a device like that, and if you are going to do one, do an electric cut out, those cables dont last all the time and the cut outs are cast iron not exhaust tubing.
So all the cut out does is make it louder unless you have quite a bit more power? Well...sounds like a good deal for a less than a hundred bucks. Any ideas where to get a fairly cheap electric one? I've found a few, but any more would be nice.
no it will not gain you any performance siinge as how the cutout you linked us to is only 2" in/out so your restricting your exhaust where ever you mount it.
unless you run 2 of them, one comming of each bank of the y pipe
unless you run 2 of them, one comming of each bank of the y pipe
Pretty much it would just be louder... if you had a forced induction setup it would make a very large difference... It's definitely useless for driving around, other than for more noise, lol.
There's not really enough displacement and air movement in the stock 4.3 to take advantage of it... Plus, very few V6s sound good without a muffler on 'em, lol
If you put it right before the muffler, it might still sound good, but a manifold dump, is going to sound.... bad, very bad, with anything less than a V8, lol
There's not really enough displacement and air movement in the stock 4.3 to take advantage of it... Plus, very few V6s sound good without a muffler on 'em, lol
If you put it right before the muffler, it might still sound good, but a manifold dump, is going to sound.... bad, very bad, with anything less than a V8, lol
Thread
Thread Starter
Forum
Replies
Last Post
metalharo9187
2nd Generation S-series (1995-2005) Tech
9
May 15, 2010 11:21 AM
96BlazinLS
2nd Generation S-series (1995-2005) Tech
14
Jul 14, 2009 07:43 AM






