2003 with 31x10.50x15

Reply Subscribe

Thread Tools

Search this Thread

May 3, 2015 | 06:17 PM

Donny Ray Hedge

Thread Starter

Beginning Member

Joined: Mar 2015

Posts: 28

Donny Ray Hedge is on a distinguished road

2003 with 31x10.50x15

im wanting to get wheel adapters 2" and im wondering if i need any kind of lift to do this....right now at full turn i rub on the INSIDE so i was wanting to widen then width track and give it a better stance?

May 3, 2015 | 06:21 PM

lazyboyjake

Junior Member

Joined: Dec 2013

Posts: 393

From: Rome, GA

You'll probably have to trim the front and back of the fender so it won't rub there as well.

May 3, 2015 | 06:35 PM

Donny Ray Hedge

Thread Starter

Beginning Member

Joined: Mar 2015

Posts: 28

i have 31x10.50 15 inch factory rim and no rubbing in the rear and the fron it rubs on the inside....

May 3, 2015 | 08:15 PM

newguy

BF Veteran

Joined: Feb 2012

Posts: 4,205

From: Easthampton, ma.

But spacers will push the tires outside the wheel well and they will rub, trust us

May 3, 2015 | 08:45 PM

Donny Ray Hedge

Thread Starter

Beginning Member

Joined: Mar 2015

Posts: 28

ok thats not a big deal...ordered 2 inches in the back and 1.5 inch up front to even the wheels out....

May 3, 2015 | 08:53 PM

AJBert

BF Veteran

Joined: Oct 2007

Posts: 2,871

From: In the Colorado mountains

They will still rub up front with the spacer. You either need to lift it or break out the sawzall and do some trimming.

May 3, 2015 | 09:18 PM

Donny Ray Hedge

Thread Starter

Beginning Member

Joined: Mar 2015

Posts: 28

shouldnt have to cut to much off the front i wouldnt think?

May 4, 2015 | 03:58 AM

newguy

BF Veteran

Joined: Feb 2012

Posts: 4,205

From: Easthampton, ma.

Gonna be more than you think. I had a 98 4 door with 2 inch body lift and 3 inch susp with 2 inch spacers, lift and still had to cut an inch off to fit 31x10.5s