lifts with 265/75/16's
#1
lifts with 265/75/16's
anyone got any pix of a blazer with a lift that will fit 265/75/16s??? wonderin if a torsion bar crank and an addaleaf will work? or maybe the 2" lift from rough country?
thanks
thanks
#2
RE: lifts with 265/75/16's
I got tbar and shackles I am planning on doing a 2" body lift with 265/75/16. they are supposed to be about equal to 31.5" diameter based on a tire size calc and convert.
#3
RE: lifts with 265/75/16's
The width won't be much of a problem. The only issue is that a 265 tire (at least on my general grabbers) translates to actual width of 10.7 inches. A 31x10.50 grabber is only 10.2' wide. So you might still have some rubbing issues at full-lock turn just from that extra width. The height shouldn't be a problem with a 2' BL or 2' lift. You might need 3' though...2' BL and 1' shackle/t-bar.
#4
RE: lifts with 265/75/16's
what about with a two wheel drive extreme wheels. they have a 4" bs and I believe are 8 or 9" wide?
#5
RE: lifts with 265/75/16's
I've got 4.5' backspace and 15x8s. I trimmed/lifted and still rub at full lock. 10.5s are prettttyyyy big.
4' of backspace will cause you to rub more than me. or you'll have to trim more than me.
4' of backspace will cause you to rub more than me. or you'll have to trim more than me.
Thread
Thread Starter
Forum
Replies
Last Post
RedNeckWagon360
Off Roading
2
04-03-2009 11:53 AM
Canadian
Tires and Wheels
6
12-21-2007 10:08 AM