Making my own bodylift...
#1
09-04-2010 | 01:46 PM
Thread Starter
|
Junior Member
Joined: Jun 2010
Posts: 414
From: Germany
Making my own bodylift...
Hi,
I want to do a 3" Bodylift on my 98 4WD Blazer, but they sell the 3" only for the 94-97 models...
So I thought I buy just the lift blocks and make the bumper brackets myself. What else will I need?
Can I use this kit? http://www.summitracing.com/parts/SUM-7850300/
What do you guys think?
I want to do a 3" Bodylift on my 98 4WD Blazer, but they sell the 3" only for the 94-97 models...
So I thought I buy just the lift blocks and make the bumper brackets myself. What else will I need?
Can I use this kit? http://www.summitracing.com/parts/SUM-7850300/
What do you guys think?
#2
09-04-2010 | 08:05 PM
Blazer Forum 2009 Ride of the Year Winner
Joined: Aug 2005
Posts: 3,066
From: North Jersey
All you need to do is fabricate new bumper brackets.
#3
09-04-2010 | 08:43 PM
BF Veteran
Joined: Oct 2007
Posts: 2,797
From: In the Colorado mountains
I'm pretty sure there is a current thread on this very same topic going on right now? Take a look under this same section and you'll find the answers you are looking for.
#4
09-04-2010 | 10:24 PM
Senior Member
Joined: May 2007
Posts: 591
From: Warren, Ohio
Actually the kit you linked is for full size HERE is the one for s-series (which is the same kit I have on mine) unfortuanately the price has gone up $30 in the last 18 months was only $60 when I bought it the only thing it does not have is bumper brackets I installed it entirely myself (body was already hanging from the rafters in my garage as I was I was mid cancer removal/repaint etc at the time.)
Thread
Thread Starter
Forum
Replies
Last Post
kankoon52
2nd Generation S-series (1995-2005) Tech
11
12-07-2007 04:36 PM
