START HERE - lift kit list
#131
Damn, even paint is illegal to sell in Cali?
#132
if it doesn't meet their requirements, then yes that brand or product line would be illegal for sale there. do a search on "hazardous material transporting", you'll be surprised what falls into that catagory, and the rules that apply to anyone that is transporting/shipping it.
#133
So, is it safe to assume the 2" rough country sus. lift is not a good choice? I was think of using it along with a 2" bl.
Thanks,
Thanks,
#134
Its because the paint isn't VOC compliant. They do sell a VOC compliant paint but its $70 more. So seeing how I bought 2 gallons. I got it from AZ and saved $$$.
#135
will shackles for a 4x4 rear end fit on a 2wd?
#136
As far as I know yes.
#137
I have a set of shackles I didnt use. Will sell them if your interested. They arent the cheapy ones from uhoh-zone. Nice quality beefy powder coated ones. let me know if your interested.
#138
s it possible to even find a 3" lift or a 4" lift for a 86' s10 blazer?
#140
This seems like the most appropriate place to ask, so I will:
Does anyone know if a 1.5-2" shackle lift could be enough to cause the driveshaft to wobble by taking the drive angles out of spec.? A GM mechanic up until the early 90's told me the input and output angles should be within either 1/2 or 1 degree of each other or it could wobble.
Last I'd checked the U-joints all appeared to be snug.
It's a 98 4dr 4wd
Any help would be greatly appreciated!
Does anyone know if a 1.5-2" shackle lift could be enough to cause the driveshaft to wobble by taking the drive angles out of spec.? A GM mechanic up until the early 90's told me the input and output angles should be within either 1/2 or 1 degree of each other or it could wobble.
Last I'd checked the U-joints all appeared to be snug.
It's a 98 4dr 4wd
Any help would be greatly appreciated!