94 s10 4x4 blazer and im thinking of doing a torsion bar front end lift because my camber is already way off and i am going to get an alignment soon so i thought hey why not lift it a little in the process, so what i would like to know is how many turns should i do on the adjustment bolt and is it going to interfere with the alignment when they go to do it?

 

4 turns of the bolt is = to 1 inch. as far as alignment goes i'm not so sure about that stuff.

 

Just don't go too crazy with it unless you have an extra 90-180 bucks or so just laying around to replace the broken CV axle(s). Trust me, been there done that.....