So my girlfrind always adjusts her seat when she drives, everyday, and i believe shes burned out the motor because yesterday it stopped moving, mostly.

So the up and down works but pushing forward and back looks like the left side works but right isnt moving and it can only go so far before it sounds like the motor is dieing but im assuming thats because the right side not moving is binding the left and the motor will break if it trys to keep going.

I took off the plastic cover on the left side and the black cover for the motor. Removed the center console too. Theres a plastic cap for a huge philips so i used a flat head to remove it on both sides to see the rod ends. The driver side moving fine. The passenger is not moving.

I was reading another forum and they said it could stop working if the ground is corroded but could that cause the motor to stop on only one side?

Probably going to picknpull to get the entire seats base and hope it works cuz idk if anywhere sells aftermarket motors.

I know its a bit odd but if anyone has any input please help.

 

Instant update.

Now the motor has stopped going forward and back on the left side and is dead. I cant test the volts because ive misplaced my volt meeter otherwise i would.