No Drivers Side Brake Light
Thread Starter
|
Beginning Member
Joined: Apr 2018
Posts: 41
HELP: No Drivers Side Brake Light
(2000 2 Door 4x4 Blazer) First off, thank you for your help, secondly; I want the reader to know that I have both turn signals and right brake light working. No it is not my bulb, I have replaced that. Maybe some fuse, relay, or im missing a ground somewhere?
Last edited by TheZR2ThatCould; Apr 12, 2018 at 07:52 PM.
Thread Starter
|
Beginning Member
Joined: Apr 2018
Posts: 41
Thread Starter
|
Beginning Member
Joined: Apr 2018
Posts: 41
Thread Starter
|
Beginning Member
Joined: Apr 2018
Posts: 41
Sorry for the late reply, what would they be labeled? And would it be in the fuse box or interior fuses or in like the firewall/ stereo area. I know their is a control block as well I havent replaced under the bumper..
Moderator
Joined: Nov 2007
Posts: 2,185
From: Zurich
If I correctly understand your problem:
Left turn signal works as it should
Right turn signal works as it should
Right brake light works as it should
Left brake light is NOT working
I would suggest to roll it up from the light fixture forward.
I'd try to jumper the left brake light ground first, then the PLUS in order to determine that the fixture itself is working correctly.
I'm not sure about the U.S. brake-turn lights. Is it the very same bulb with only one filament or does it have two separate bulbs or a two filament bulb?
That would be my first analysis. Just make sure the fixture is working. Then move forward from there.
Left turn signal works as it should
Right turn signal works as it should
Right brake light works as it should
Left brake light is NOT working
I would suggest to roll it up from the light fixture forward.
I'd try to jumper the left brake light ground first, then the PLUS in order to determine that the fixture itself is working correctly.
I'm not sure about the U.S. brake-turn lights. Is it the very same bulb with only one filament or does it have two separate bulbs or a two filament bulb?
That would be my first analysis. Just make sure the fixture is working. Then move forward from there.
Thread Starter
|
Beginning Member
Joined: Apr 2018
Posts: 41
If I correctly understand your problem:
Left turn signal works as it should
Right turn signal works as it should
Right brake light works as it should
Left brake light is NOT working
I would suggest to roll it up from the light fixture forward.
I'd try to jumper the left brake light ground first, then the PLUS in order to determine that the fixture itself is working correctly.
I'm not sure about the U.S. brake-turn lights. Is it the very same bulb with only one filament or does it have two separate bulbs or a two filament bulb?
That would be my first analysis. Just make sure the fixture is working. Then move forward from there.
Left turn signal works as it should
Right turn signal works as it should
Right brake light works as it should
Left brake light is NOT working
I would suggest to roll it up from the light fixture forward.
I'd try to jumper the left brake light ground first, then the PLUS in order to determine that the fixture itself is working correctly.
I'm not sure about the U.S. brake-turn lights. Is it the very same bulb with only one filament or does it have two separate bulbs or a two filament bulb?
That would be my first analysis. Just make sure the fixture is working. Then move forward from there.
