Thank you
#1
Thank you
Just a quick thanks for the helpful people here on the forums.
I had a "cool" heater problem on my '05, 80,000 blzr.
Changing the stat produced no joy.
After doing lots of reading I found where someone mentioned in-coming heater hose hot
out-going hose cool= reduced flow in heater core, was spot on!
I removed the hoses @ pump/manifold and applied a garden hose enema, reattached hoses/refilled.
Now the heat coming out of the dash outlets will fry an egg just like it was when new.
It will get a complete/total system flush in the spring, replacing the Death-A-Cool with the good green stuff.
Thanks again,
ol'George
I had a "cool" heater problem on my '05, 80,000 blzr.
Changing the stat produced no joy.
After doing lots of reading I found where someone mentioned in-coming heater hose hot
out-going hose cool= reduced flow in heater core, was spot on!
I removed the hoses @ pump/manifold and applied a garden hose enema, reattached hoses/refilled.
Now the heat coming out of the dash outlets will fry an egg just like it was when new.
It will get a complete/total system flush in the spring, replacing the Death-A-Cool with the good green stuff.
Thanks again,
ol'George
Thread
Thread Starter
Forum
Replies
Last Post
keithjannjr1994
2nd Generation S-series (1995-2005) Tech
7
03-11-2014 01:17 PM
harrymanback
2nd Generation S-series (1995-2005) Tech
3
10-29-2008 06:38 PM