Off Roading Got a story about taking your Blazer off the paved roads? This is your section!

Shackles & D-Rings

Old Apr 13, 2015 | 09:00 PM
  #1  
Old Skool Soldier's Avatar
Thread Starter
|
Junior Member
Joined: Mar 2011
Posts: 358
From: Sault Ste Marie, ON, Canada
Old Skool Soldier is on a distinguished road
Default Shackles & D-Rings

Hey all,

Was wondering what happened to the Synergy shackle& D ring kit? I don't have tow hooks factory, and I plan on a body raise. Will the body raise affect placement of these? I removed the bumper cover

Thanks!
 
Old Apr 13, 2015 | 09:16 PM
  #2  
rexmburns's Avatar
Super Moderator
Joined: Sep 2011
Posts: 4,459
From: Northern VA
rexmburns is a jewel in the roughrexmburns is a jewel in the roughrexmburns is a jewel in the rough
Default

Not sure if they still carry them or not but you can do the same thing for about $40 yourself! I just bought the tubes from harbor freight and then drilled them to fit where the factory hooks were located I also drilled them to fit the two bolts that hold the skid plate as well for a total of four bolts holding them in place. Mine were mounted inside the frame rails so the body lift had no effect on them. The other thing I did was to ditch the D rings they came with and added some bigger/better ones.
 
Old Apr 14, 2015 | 10:11 PM
  #3  
Old Skool Soldier's Avatar
Thread Starter
|
Junior Member
Joined: Mar 2011
Posts: 358
From: Sault Ste Marie, ON, Canada
Old Skool Soldier is on a distinguished road
Default

Is there a certain diameter I need to shop for, or are all these typically one size?
 
Old Apr 15, 2015 | 04:43 AM
  #4  
newguy's Avatar
BF Veteran
Joined: Feb 2012
Posts: 4,205
From: Easthampton, ma.
newguy will become famous soon enoughnewguy will become famous soon enough
Default

all are usually 2 inch. Made to fit trailer hitch receiver
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JohnBarJB
Audio/Video Electronics
17
Sep 28, 2020 07:34 PM
dirtydave
Suspension Tech
4
Dec 18, 2009 04:21 PM
lowbucktruck
Engine & Transmission
5
Sep 17, 2007 05:20 AM
kerander
Audio/Video Electronics
5
May 13, 2007 08:19 PM
EuroGoldLS
Audio/Video Electronics
13
Apr 12, 2007 12:22 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 01:40 AM.