2003 Blazer LS rear tailgate
#1
2003 Blazer LS rear tailgate
I have a 2003 Blazer LS 4 door. It has the rear 2 piece hatch. Window goes up, tailgait goes down. The inside plastic panel for the tailgate is cracked in areas and I've been trying to find a replacement. Does anyone know how I can find out the stock part # for this part? I'm having the hardest time finding one and none of the local junk yards have any Blazers, I've checked 3 different yards, eBay, Google... Any help would be appreciated, thank you!
#2
Have you gone to a GM dealer yet? Besides a yard that's the only place I could think of. Either that or make your own.
Someone's been working hard. I've hauled lumber and concrete blocks in my Blazer and my panel did not crack until I put a complete 5.3 V8 out on the tailgate.
Someone's been working hard. I've hauled lumber and concrete blocks in my Blazer and my panel did not crack until I put a complete 5.3 V8 out on the tailgate.
#3
I've tried GMPartDirect.com, but they seem very sketchy. Is that a legitimate site? I was looking for the bottom molding for my rear left passenger window once and they sent me an email that made no sense, said "dear xxxxxx", and they couldn't give me a picture of the part, yet they said they had it. Anyway, I went to ebay for that, but ebay doesn't have the part I'm looking for now. Is there another GM site that people on here use for interior moldings and panels?
And I wouldn't know the first thing about making my own interior tailgate panel haha.
Thank you, I'll search for some more GM parts dealers
And I wouldn't know the first thing about making my own interior tailgate panel haha.
Thank you, I'll search for some more GM parts dealers
#4
Ok, so I've checked every possible Gm parts dealer and they all say the same thing... The interior tailgate part 15044155 is discontinued. Still have had no luck finding any at the junk yards.
So, how do I go about making one or having one made? Does anyone know if there is an aftermarket panel that will fit? There has to be a business that would still make auto body parts that are discontinued. It's only a 2003, so it's old, but not super old. I mean, people need to repair their vehicles.
If I had a 1983 camaro or something, it'd be easier to find parts
So, how do I go about making one or having one made? Does anyone know if there is an aftermarket panel that will fit? There has to be a business that would still make auto body parts that are discontinued. It's only a 2003, so it's old, but not super old. I mean, people need to repair their vehicles.
If I had a 1983 camaro or something, it'd be easier to find parts
Thread
Thread Starter
Forum
Replies
Last Post
18whlsroll
2nd Generation S-series (1995-2005) Tech
2
09-08-2013 12:01 AM
pewter00blazer
2nd Generation S-series (1995-2005) Tech
2
06-30-2012 10:57 PM
XTREME POS
2nd Generation S-series (1995-2005) Tech
5
05-29-2008 09:05 PM